HELIUM LEAK TESTING - FOR REFRIGERANT COMPONENTS

Phoenix Industry solutions ( PIS ) offers low cost Helium Leak Testing Machine ( HLT-DC02) which is used to Test the Job with volume ranging from 0.001 m3 to 0.1 m3using Helium gas at pressure ranging  from 30 PSIG to 3000 PSIG.

HLT-DC01  is specially designed for  Vacuum based Helium  leak test applications, such as Refrigeration components, pipes and manifolds  etc. It comes with optional Recovery System HHRS to recycle the expensive Helium Gas for the Leak Testing

​

APPLICATION

Leak Testing of Auto components- Heat Exchangers, Evaporators, Condensers

CLICK ON IMAGE BELOW TO WATCH VIDEO

HELIUM LEAK TESTING - FOR SWITCHGEAR COMPONENTS

Phoenix Industry solutions ( PIS ) offers low cost Helium Leak Testing Machine  which is used to Test the Job with volume UPTO 5  ltrs  using Helium gas at pressure ranging  from 30 PSIG to 3000 PSIG.

HLT-DC01  is specially designed for  Vacuum based Helium  leak test applications, such as Bushings , Insulators , Switchgear Components . It comes with optional Recovery System HHRS to recycle the expensive Helium Gas for the Leak Testing

HELIUM LEAK TESTING - FOR ALUMINIUM CASTINGS

PIS have expertized in Leak Testing of Large parts such as Aluminium Castings , fabricated tanks etc. Vacuum Chamber size of 3m x 2.5m x 2m can accommodate most of the jobs of large size. With Economic design and skilled workforce we are able to supply Leak testing machine with huge chamber size at affordable price for the customers.

VIDEO

HELIUM LEAK TESTING - Condensers & Evaporators

Phoenix Industrial solutions have developed Helium Leak testing machines suitable for Testing of Condensers and Evaporators in a high production Testing line. Cycle time varies from 45 secs to 2 mins .

HELIUM LEAK TESTING - Fire Extinguishers

Leak test system for pre-filled fire extinguishers to meet rigorous demands of the fire protection industry. The customer needed to meet the requirements of this low volume system with a limited budget. 

We engineered a custom leak test system with a helium mass spectrometer leak detector capable of hard vacuum leak testing down to 5 x 10-12 atm.cc/sec. 

HELIUM LEAK TETSING - FOR FUEL TANKS

Phoenix Industry solutions ( PIS ) is specialized in the Automatic Leak Testing of Auto components for many years. Fuel tanks have previously been regarded as leak testing problem. The volume is unstable and too large for Air decay testing. Water dunk method is operator dependent , unreliable and causes long term damage to the unpainted tank. Neither method could detect a fine vapour leak.

PIS is able to supply Fuel tank leak testing using Helium. The system provides a fast reliable dry test with numerical leak results. The sensitivity is better than "Water Dunk bubble" test method.  Automatic Quick sealing fixtures, Self monitoring systems enables unskilled operator to be deployed.

​

The system is suitable for leak testing metal or plastic tanks.

CLICK ON IMAGE BELOW TO WATCH VIDEO

​​

HELIUM LEAK TESING MACHINE- MEDIUM VOLTAGE SWITCHGEARS

Phoenix Industry solutions ( PIS ) offers low cost Helium Leak Testing Machine ( HLTM ) which is used to Test the Job with volume ranging from 0.001 m3 to 0.01 m3using Helium gas at pressure ranging  from 30 PSIG to 3000 PSIG

HLTM  is specially designed for  Vacuum based Helium  leak test applications for Medium and High Voltage Switchgears such as RMUs and GIS

The HLTM Helium Leak Testing machine comes with optional Recovery System HHRS to recycle the expensive Helium Gas for the Leak Testing

The HLTM Helium Leak Testing machine has Leak Testing sensitivity up to 1 X 10E- 9 mbarltr/sec.

Auto SF6 Filling feature enables filling of the SF6 gas at required pressure after successful Leak Testing..without disconnecting the Job from the circuit . 

CLICK ON IMAGE BELOW TO WATCH VIDEO

HELIUM LEAK TESTING - LARGE PARTS / TANKS

Phoenix Industrial solutions have developed Helium Leak testing machines suitable for Testing of Large parts of dims upto 10 mtrs in length and 1 mtr in Diameter. Testing of such parts require huge Vacuum Chambers with capability of reaching fine vacuum up to 10 x -3 mbar . Leak rates in the range of 10 x E -7 mbarl/s can be easily detected.

HELIUM LEAK TESTING -High Pressure Components

Phoenix Industrial solutions have developed Helium Leak testing machines suitable for Testing of small components to be tested at very high pressure upto 500 bar. Special care is taken for manufacturing of vacuum chambers to sustain very high pressure explosion inside.  vacuum up to 10 x -3 mbar . Leak rates in the range of 10 x E -5 mbarl/s can be easily detected.

HELIUM LEAK TESTING - Alloy Wheels

The leak tester is specially used for aluminum wheels for automobiles and motorcycles. 

• The chamber method adopted for accurate inspection. Pass or fail is judged according to the leak amount against the leak threshold value.Cycle time: 10 to 30 seconds *Depends on the equipment

HELIUM LEAK TESTING MACHINE - FOR CNG REGULATORS

Phoenix Industry solutions ( PIS ) offers reliable Helium Leak Testing Machine which is used to Test the Job with volume ranging from 10cc to 1000 cc m3using Helium gas at pressure ranging  from 30 PSIG to 3000 PSIG.

It  is specially designed for  Vacuum based Helium  leak test applications, such as CNG  components, pipes and manifolds  etc. that needs High Pressure Helium Leak Testing. It comes with optional Recovery System HHRS to recycle the expensive Helium Gas for the Leak Testing

CLICK ON IMAGE BELOW TO WATCH VIDEO

PORTABLE HELIUM LEAK TESTING - VALVES & FITTINGS

Phoenix Industrial solutions have developed portable Helium Leak testing machines for testing of Valves & fittings at high pressures.

The tests can be performed in SNIFFING mode as well as VACUUM mode. Automatic switching between test modes.

Machine is portable and mobile can be easily moved in the shopfloor for performing tests ar different locations.

Vacuum Pump of 30m3/hr for evacuation of test job / Chamber helium leak detector sensitivity 5 x 10 E -12 mbarl/s

HELIUM LEAK TESTING - LARGE PARTS / ASSEMBLIES

Phoenix Industrial solutions have developed Helium Leak testing machines suitable for Testing of Large parts of dims upto 5 mtrs in length and 1 mtr in Diameter. Testing of such parts require huge Vacuum Chambers with capability of reaching fine vacuum up to 10 x -3 mbar . Leak rates in the range of 10 x E -7 mbarl/s can be easily detected.

HELIUM LEAK TESTING - Oil Barrels / Drums

​Adoption of helium leak testers makes it possible to ensure reliability of leak test of large-sized drums. With this wise
choice in place, difficult-to-test portion such as welded or seamed place as well as material defect causing fine leak can
be automatically detected with great preciseness. Conventional ways such as pressure drop method and water bubble
leak method have been eliminated from a choice by quality-conscious drum manufacturers.

HELIUM LEAK TESTING - CNG Regulators

Helium Leak Testing application for CNG regulators in Automotive requires Leak testing not only at high pressure but also during operation with coil operated inside the chamber. Internal , External and whole body leak testing is performed during the Auto cycle check. Leak Testing is done step wise with Low pressure to High pressure Inputs